日本高清h色视频在线观看,欧美一区内射最近更新,国产成人a∨激情视频厨房,亚洲精品无码专区在线在线播放

中文
Polypropylene fibre
Release Time:2020-04-14 16:17:40      The number of clicks:507

Polypropylene fiber is composed of propylene polymerization, melt spinning, due to no polar group molecules, intermolecular force is small, and because of the molecular chain more smooth, so the glass transition temperature of polypropylene under 0 ℃, the fiber with must adopt isotactic polypropylene polymerization, make each atom of polypropylene macromolecule and groups in three dimensional space as a regular arrangement, can reach 165-170 ℃, melting point due to propylene attraction between the molecules is small, so the molecular weight of polypropylene resin in 200000 or more, the melt viscosity, therefore, when the melt spinning temperature control at above 100 ℃ higher than the melting point, generally is 285 ℃ or higher. The polypropylene molecular chain is pliable with good regularity, and it is easy to crystallize during spinning. The crystallinity of the primary fiber is up to 50%. When spinning, the temperature of the silk chamber is controlled below 30℃, so that the primary fiber can generate unstable pseudo-hexagonal crystals, which are easy to be stretched during post-processing. The preparation of coarse polypropylene fiber can also be used thin film method short-range spinning equipment, the extruder out of the cured film with grooves on the roller to split into fiber. Polypropylene fiber density is 0.91 g/cm', is the chemical fiber in the light of the species, fiber does not absorb moisture, under standard conditions the moisture regain rate is close to 0, dry and wet state performance without significant change, no mold and no moth. Because of the non-hygroscopicity, dyeing is difficult, the spinning dyeing method can be used to solve the problem of dyeing polypropylene, but the chromatography is not complete.

Polypropylene fiber strength and initial modulus are high, close to polyester, wear resistance and elasticity are good, but when the load increases, polypropylene fiber creep elongation is greater than polyester, under high stress modulus and fracture strength is higher than polyester, so polypropylene fiber is a strong and tough fiber.

Polypropylene fiber glass temperature is very low, so the heat setting effect is not stable. The softening point is 140-150℃, and the melting point is 165-173℃. It is melted on one side and burned slowly on the other side in the flame.

The thermal conductivity in the fiber is the lowest, good insulation performance. Polypropylene is a carbon chain polymer, macromolecular chain without weak links, chemical stability is good, in addition to chloric acid, nitric acid and other oxidation acid destruction, the resistance to other acids is good. Alkali resistance, in addition to the strong caustic soda,

The alkali has no effect on the strength of polypropylene. Polypropylene resistant to general organic solvents such as ethanol, ethyl ether, benzene, acetone, gasoline, tetrachloroethylene are not dissolved in hot benzene and gasoline swelling, can dissolve in hot chlorobenzene, tetrahydronaphthalene and dechydronaphthalene.

Polypropylene fiber has good electrical insulation performance, but it is easy to accumulate static electricity in processing, and the spinnability of pure polypropylene fiber is poor.

Polypropylene fiber is easy to age, because the hydrogen atom on the tertiary carbon atom in the polypropylene macromolecular chain is quite active, which is easy to be affected by light, heat and so on and produces active free radical, and causes the free radical chain degradation reaction, which promotes the break of macromolecular chain. When isotactic polypropylene fibers are stored at 50℃ for one year, they lose their value. In order to prevent aging, spinning often add anti-aging agent, in order to slow down the aging process, the better effect of o-hydroxydiphenyl ketone and nickel containing metal organic compounds, adding 1% to 3% graphite to prevent photosensitive aging is the most effective, but not suitable for the production of white fiber.

Polypropylene fiber due to the manufacturing cost is low, the proportion of small and excellent physical and chemical properties and got rapid development, in addition to a large number of used in the manufacture of industrial fabrics, non-woven fabric, also began to dress, especially because of the polypropylene fiber has a core role in absorption, can through the fabric of the capillary water vapor transfer out, itself is no absorption effect, make the skin dry, is of strong manufacturing sportswear, garment and other manual labor permeable fabric, etc.


News of interest
Previous:No
Next:Propane fabric production essentials

Back to list

LINKS:

all rights reserved:Jiangsu Hezhong Cloth Industry Co., Ltd.

Design production:winsharing
国产亚洲精品无码成人 | 亚洲av片一区二区三区| 精品国产成人亚洲午夜福利| 国产剧情av麻豆香蕉精品| 亚洲视频在线观看| 国产精品亚洲日韩欧美色窝窝色欲| 少妇高潮喷水久久久影院| 内射交换多p国产| 男人的天堂免费a级毛片无码| 人人妻人人澡人人爽人人精品 | a级毛片内射免费视频| 伊人色综合九久久天天蜜桃| 中文字幕丰满乱孑伦无码专区| 亚洲av综合av一区二区三区| 日本久久久久亚洲中字幕| 久久精品国产精品| 黑人上司好猛我好爽中文字幕| 无码人妻精品丰满熟妇区| 国产精品无码一区二区在线| 无码人妻少妇色欲av一区二区| 中出人妻中文字幕无码| 亚洲av无码国产丝袜在线观看| 国产精品涩涩涩视频网站| 无码国产精成人午夜视频一区二区| 黄桃av无码免费一区二区三区| 领导边摸边吃奶边做爽在线观看| 野花社区视频www官网| 国产精品久久久久aaaa| 久久精品无码一区二区无码| 亚洲精品国产电影| 久久人妻少妇嫩草av无码专区| 中文字幕美人妻亅u乚一596 | 内射夜晚在线观看| 国产日韩综合一区二区性色av| 色妺妺视频网| 日韩人妻无码一区二区三区| 激情综合五月| 少妇被粗大的猛进69视频| 免费看撕开奶罩揉吮奶头视频| 人妻献身系列第54部| 日本a级特黄特黄刺激大片|